Executory Contract vs. Executed Contract: Definitions and Examples

Signing a contract feels like the finish line. For most agreements, it’s the start: rent gets paid for years, software ships every month, milestones get invoiced across a project. Until both sides have performed, the deal stays open, and that status starts to matter the moment a counterparty misses a payment or files for bankruptcy.

This guide explains the difference between executed and executory contracts for in-house counsel, contract managers, and the finance and credit teams that work with them. You’ll get the two meanings of “executed,” a side-by-side comparison, real examples, the Section 365 rules that apply when a counterparty goes under, and a five-step method to keep open obligations under control.

What is an executory contract?

An executory contract is an agreement under which both parties still have material obligations to perform. If either side stopped performing, that failure would constitute a material breach that could excuse the other party’s performance. The contract is signed and binding, but performance is still ongoing on both sides. It remains executory until those obligations are complete.

For US bankruptcy purposes, what counts as an executory contract? Most courts start with the test Professor Vern Countryman proposed in a 1973 Minnesota Law Review article: a contract under which the obligations of both the debtor and the other party remain so far unperformed that either party’s failure to complete performance would constitute a material breach excusing the other party’s performance. The Bankruptcy Code does not define the term, so the Countryman test is the working definition of an executory contract that you’ll see cited in court opinions.

You’ll also see “executory agreement” used as a synonym. The same test applies.

The practical point: much of your active portfolio is probably executory right now. An office lease where you still pay rent and the landlord still provides the premises. A SaaS subscription where you pay monthly and the vendor keeps the platform running. Among the other types of contracts, this one classifies by performance status, not by how a deal is formed or whether it’s enforceable.

The practical point: much of your active portfolio is probably executory right now. An office lease where you still pay rent and the landlord still provides the premises. A SaaS subscription where you pay monthly and the vendor keeps the platform running. The same classification applies across different types of contracts and turns on performance status, not on how a deal is formed or whether it’s enforceable.

Executed contract: signed or fully performed?

Ask five lawyers what is an executed contract and you’ll get two answers. Both are correct.

  • Executed = signed by all required parties: In business practice, a fully executed contract is the final version signed by everyone who needs to sign. The execution date is the day the last party signs; the effective date is when obligations start, and it can fall before or after signature. Parties often sign in counterparts (separate signature pages that together form one agreement). “Duly executed” means signed with the required formalities, by people with authority to bind the company.

    Under the federal ESIGN Act and the Uniform Electronic Transactions Act (UETA), which has been adopted in most US jurisdictions, an electronic signature signature generally cannot be denied legal effect solely because it is electronic, subject to applicable exceptions and formalities.
  • Executed = fully performed: In contract law classification, an executed contract is one where every obligation has been completed. Nothing is left to deliver, pay or do.

This is where most confusion starts. A fully executed contract in the signing sense is, in most cases, still executory in the performance sense. The signature closes negotiation. It doesn’t close the deal.

Executory vs. executed contract: key differences

The table below uses the performance meaning of “executed”, because that’s the distinction that changes your risk and your workload.

CriterionExecutoryExecuted (fully performed)
Performance statusIn progress on both sidesCompleted by both sides
Obligations remainingMaterial obligations still open for each partyNone, apart from surviving clauses such as confidentiality
Risk of breachLive: either party can still fail to performLimited to claims relating to past performance
Treatment if a party goes bankruptSection 365 applies: the debtor can assume or rejectNothing left to assume or reject; only claims remain
What needs trackingDeadlines, deliverables, payments, renewals, notice windowsRecords retention and surviving obligations
Typical examplesLeases, subscriptions, supply and service agreementsPaid and delivered one-off purchases, completed asset sales

A contract can move through these states over its lifecycle. It’s drafted, signed, and performed over months or years, and it becomes executed in the full-performance sense once all material obligations have been completed.

Executory contract examples

Each executory contract example below shows what is still open and the point at which it becomes fully performed.

ContractWhat remains executoryWhen it becomes executed (fully performed)
Commercial or equipment leaseTenant pays rent; landlord or lessor provides the premises or equipmentLease term ends and final payments and return conditions are met
Real estate purchase agreement (between signing and closing)Buyer owes the price; seller owes clear title and the deedClosing: funds are transferred and the deed is delivered
SaaS subscriptionCustomer pays fees; vendor provides access, support and uptimeSubscription term ends, no renewal and all fees settled
Supply or distribution agreementSupplier delivers goods; buyer orders and pays; exclusivity and volume terms runLast delivery accepted and paid, term expires
IP license with ongoing royaltiesLicensee reports and pays royalties; licensor maintains the IP and the licenseLicense term ends and final royalties are paid
Construction or service contract with milestonesContractor delivers each milestone; client pays against each oneFinal milestone accepted and retention released

Real estate purchase agreements are a common example of executory contracts that can catch teams out. A purchase agreement can remain open for months between signing and closing, and a bankruptcy filing during that period may bring Section 365 into play.

For an executed contract example, think of a one-off equipment purchase. You pay the invoice, the supplier delivers, you accept the goods. Apart from any warranty, nothing is left for either side to do.

Know which of your contracts are still open

See every signed agreement with its status, owner and next deadline, so you can answer the moment a counterparty misses a payment.

Executory contracts in bankruptcy: Section 365

Here’s where classification stops being academic. Under 11 U.S.C. § 365, a debtor or trustee may assume or reject an executory contract or unexpired lease, subject to court approval. Your own performance obligations may continue while the contract remains in force, but the answer depends on the contract, applicable law, and any bankruptcy court orders.

A bankruptcy filing does not automatically give you a right to terminate the contract. Section 365(e) generally makes ipso facto clauses, which terminate a contract because a party files for bankruptcy or becomes insolvent, unenforceable, subject to statutory exceptions. If your exit plan relies on one, get bankruptcy counsel’s advice before acting.

Executory status is generally assessed as of the bankruptcy petition date, and the remaining obligations must be material. In In re Weinstein Co. Holdings, 997 F.3d 497 (3d Cir. 2021), the court held that a producer’s work-for-hire agreement was not executory because his remaining obligations were not material. Minor or ancillary obligations may not be enough to bring a contract under Section 365.

Timing depends on the chapter:

  • Chapter 7: the trustee has 60 days after the order for relief to assume, or the contract is deemed rejected (unless the court extends it).
  • Chapter 11: the debtor can usually wait until plan confirmation, though you can ask the court to set an earlier deadline.
  • Nonresidential real property leases: 120 days, extendable by 90 days (§ 365(d)(4)).

Assumption and assignment

To assume a contract in default, the debtor must cure or provide adequate assurance of promptly curing the defaults, compensate the counterparty or provide adequate assurance of compensation for actual pecuniary loss, and provide adequate assurance of future performance (§ 365(b)). Assumption is often the better outcome if you want the contract to continue, but the practical result depends on the case and the debtor’s ability to perform.

After assumption, the debtor may be able to assign the contract to a buyer despite an anti-assignment clause (§ 365(f)). Section 365(c) creates exceptions where applicable law excuses the nondebtor party from accepting performance from, or rendering performance to, an entity other than the debtor, including in some personal-services and intellectual-property licensing contexts.

Check the proposed cure amount line by line. A cure schedule may omit unbilled charges or disputed amounts, and the objection deadline may limit your ability to challenge the figure. Check the governing notice and applicable court rules.

Rejection and what it means for the counterparty

Rejection is treated as a breach that occurred immediately before the bankruptcy filing (§ 365(g)). You generally receive a prepetition claim for damages, usually as a general unsecured claim, but the claim’s amount and recovery depend on the case.

Rejection does not automatically rescind rights that the contract previously granted. In Mission Product Holdings v. Tempnology (2019), the Supreme Court held that rejection has the same effect as a breach outside bankruptcy and therefore does not, by itself, revoke a trademark license. Section 365(n) separately protects certain licensees of intellectual property, including patents and copyrights, subject to its conditions.

If a counterparty files, work through this checklist:

  1. Identify every contract with the debtor, including amendments and purchase orders signed by other business units.
  2. Review cure notices and object on time if the amount is wrong or incomplete.
  3. Don’t terminate based on an ipso facto clause. Get bankruptcy counsel’s view before you stop performing.
  4. File a proof of claim before the bar date, and watch for any separate deadline for rejection damages.

How to manage open obligations in executory contracts

Everything above assumes you know which contracts are still open and what contract obligations each side still carries. Many teams build that list during a crisis, which is the worst time to start. Here’s how to keep it current:

  1. Keep every signed agreement in one repository with its status. Signed, in force, fully performed, expired: if status lives in someone’s inbox, you can’t answer a cure notice in time.
  2. Extract obligations, milestones and payment terms, with owners and due dates. Good contract obligation tracking turns clauses into named tasks someone is accountable for.
  3. Set alerts for renewal and termination notice windows. A 90-day non-renewal window missed by a week can lock you into another full term. A structured approach to contract renewal management prevents that.
  4. Monitor counterparty risk on your key contracts. Credit, finance and legal should share one view of exposure per counterparty, so a bankruptcy filing doesn’t come as a surprise.
  5. Close out contracts formally once fully performed. Record the completion date, then keep the file under your retention policy.
Smart Reports DiliTrust
Turn a contract search into a Smart Report and see which agreements carry termination clauses, penalty provisions or other terms you need to watch.

A spreadsheet may work for a small portfolio. As the portfolio grows, contract management software can help automate date tracking and maintain current status records.

Stop chasing contract deadlines by hand

Get a practical overview of how legal teams move from signature to obligation tracking and renewal alerts in one place.

Frequently asked questions

These are the questions legal and finance teams ask most often about contract status.

Is a signed contract executed or executory?

Both, depending on which meaning you use. Once every party has signed, the contract is “executed” in the business sense of fully signed. But if either side still has material obligations to perform, such as payments, deliveries or services, it remains executory in the legal sense until those obligations are complete.

Is a lease an executory contract?

An unexpired lease is not necessarily classified as an executory contract, but Section 365 treats unexpired leases similarly for assumption and rejection. A debtor can generally assume or reject an unexpired lease that has not ended, subject to the statute, applicable deadlines, and court approval. Nonresidential real property leases have their own deadline: 120 days after the order for relief, extendable by 90 days.

What does “duly executed” mean?

“Duly executed” means the contract was signed by authorized persons with all the formalities required by law or by the contract itself, such as witnessing, notarization, or board approval when those formalities are required.

Can an executory contract be terminated?

Yes. Outside bankruptcy, a contract may be terminated under its termination clause, by mutual agreement, or for material breach. Once a counterparty files for bankruptcy, Section 365(e), together with any applicable automatic-stay rules under § 362, may limit termination based on the filing or insolvency alone. Get bankruptcy counsel’s advice before sending a termination notice.

What is the difference between executed and executory consideration?

Executed consideration is an act already performed in exchange for a promise, such as paying in full when you place an order. Executory consideration is a promise to perform in the future, such as paying on delivery or providing services next quarter. Commercial contracts can include both.

From signature to full performance

A signature starts your exposure. That’s when things can go wrong: a missed delivery, a disputed invoice, a counterparty that files on a Friday afternoon.

Knowing which agreements are still executory, and exactly what each side still owes, is what lets you act in days instead of weeks when that happens. Treat contract status as live data, owned and updated, and the next counterparty failure becomes a process you run.

Track every contract from signature to full performance

Avatar photo
Author

Jana Haberkern

Marketing Manager at DiliTrust

Jana Haberkern leads marketing for the DACH region at DiliTrust and works across global teams. She has spent several years in Legal Tech, including at a Legal AI startup that successfully exited. Jana focuses on the questions that matter most to legal teams right now: how AI is changing their day to day, what digitalization really means for legal departments, and where Legal AI is heading next.